Meet your new favorite little beast: a 1-5/8" Straight Carving Blade (no handle) built to carve, hold an edge.
Quick facts:
A precision-cut powerhouse: the CPM3v Upsweep blade, 1 1/4" — compact, wickedly capable, and engineered for serious edge work.
Why this blade?
Material mastery: CPM3V steel delivers exceptional toughness and edge retention. It resists chipping under heavy use, so you can pry, carve, and slice without worrying about catastrophic failure.
Upsweep advantage: The pronounced belly and upward curve give you superior slicing geometry — draw cuts bite deep, skinners and food prep are effortless, and fine control is second nature.
Corrosion resistance with character: CPM3V isn’t stainless, but with proper finish and care it holds up; the steel’s stability lets makers apply stonewashed, bead-blasted, or DLC finishes that look mean and clean.
Builder-friendly blank: This blade-only piece accepts custom handles, liners, and sheaths with precision fitment — perfect for makers who want a high-performance core to build around.
Bottom line: The CPM3V 1 1/4" Upsweep blade merges compact convenience with industrial-grade toughness and slicer-first geometry. It’s the tiny workhorse your next build deserves.
Blade length: 1-5/8"
Style: Straight carving — clean lines, clean cuts
Steel: CPM 3V — tool-grade toughness with real edge retention
Heat treatment: Cryogenic quench — pushes the steel’s toughness into overdrive
Hardness: Rockwell 60–63 — harder than typical carving knives, yet still user-friendly to sharpen
Stropping: Works with any compound; we prefer Diamond Emulsions for peak polish
What sets it apart:
CPM 3V is a cryo-friendly, high-toughness powder steel. With the cryogenic quench applied, this blade resists chips and cracks under hard use, so it keeps slicing even when the chips are flying (literally).
Rockwell 60–63 is the sweet spot for carvers who want edge life without the drama of ultra-brittle steels. You get a razor edge that holds up longer between touch-ups but can still be reprofilied and sharpened by hand without calling in a blacksmith.
No handle means versatility. Fit it to your custom scales, lathe-turned pommel, or whatever quirky handle project you've been saving for a rainy Sunday. This is a blade blank made for makers.
Sharpening and edge care:
Regular sharpening is straightforward. If you like silky stropping results, diamond emulsions are our go-to — they speed polish, equalize micro-serrations, and bring the edge to a finer, longer-lasting keen.
If you prefer traditional compounds, the steel plays nicely with them too. Stropping with green, white, or red compounds will give excellent results; diamond simply accelerates perfection.
Bottom line: This 1-5/8" CPM 3V straight carving blade with a cryogenic quench is the practical show-off of small blades: tough, long-lived, and receptive to sharpening and stropping rituals. No handle? Exactly — you get to make it yours.
Ready to build the handle of your dreams or stash it as a premium blade blank? This one’s built to be earned.
Meet your new favorite little beast: a 1-5/8" Straight Carving Blade (no handle) built to carve, hold an edge.
Quick facts:
A precision-cut powerhouse: the CPM3v Upsweep blade, 1 1/4" — compact, wickedly capable, and engineered for serious edge work.
Why this blade?
Material mastery: CPM3V steel delivers exceptional toughness and edge retention. It resists chipping under heavy use, so you can pry, carve, and slice without worrying about catastrophic failure.
Upsweep advantage: The pronounced belly and upward curve give you superior slicing geometry — draw cuts bite deep, skinners and food prep are effortless, and fine control is second nature.
Corrosion resistance with character: CPM3V isn’t stainless, but with proper finish and care it holds up; the steel’s stability lets makers apply stonewashed, bead-blasted, or DLC finishes that look mean and clean.
Builder-friendly blank: This blade-only piece accepts custom handles, liners, and sheaths with precision fitment — perfect for makers who want a high-performance core to build around.
Bottom line: The CPM3V 1 1/4" Upsweep blade merges compact convenience with industrial-grade toughness and slicer-first geometry. It’s the tiny workhorse your next build deserves.
Blade length: 1-5/8"
Style: Straight carving — clean lines, clean cuts
Steel: CPM 3V — tool-grade toughness with real edge retention
Heat treatment: Cryogenic quench — pushes the steel’s toughness into overdrive
Hardness: Rockwell 60–63 — harder than typical carving knives, yet still user-friendly to sharpen
Stropping: Works with any compound; we prefer Diamond Emulsions for peak polish
What sets it apart:
CPM 3V is a cryo-friendly, high-toughness powder steel. With the cryogenic quench applied, this blade resists chips and cracks under hard use, so it keeps slicing even when the chips are flying (literally).
Rockwell 60–63 is the sweet spot for carvers who want edge life without the drama of ultra-brittle steels. You get a razor edge that holds up longer between touch-ups but can still be reprofilied and sharpened by hand without calling in a blacksmith.
No handle means versatility. Fit it to your custom scales, lathe-turned pommel, or whatever quirky handle project you've been saving for a rainy Sunday. This is a blade blank made for makers.
Sharpening and edge care:
Regular sharpening is straightforward. If you like silky stropping results, diamond emulsions are our go-to — they speed polish, equalize micro-serrations, and bring the edge to a finer, longer-lasting keen.
If you prefer traditional compounds, the steel plays nicely with them too. Stropping with green, white, or red compounds will give excellent results; diamond simply accelerates perfection.
Bottom line: This 1-5/8" CPM 3V straight carving blade with a cryogenic quench is the practical show-off of small blades: tough, long-lived, and receptive to sharpening and stropping rituals. No handle? Exactly — you get to make it yours.
Ready to build the handle of your dreams or stash it as a premium blade blank? This one’s built to be earned.
